paper(ipcq): regen alternatives figures + comparison plot + allreduce section

Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>

docs/report/1H-codesign-paper/sections/04-allreduce.tex

@@ -145,9 +145,9 @@ with credit return, splitting the control plane into PE\_IPCQ and the
 data plane into PE\_DMA, with head updates riding the payload and tail
 updates riding a 16\,B side-channel credit (\S\ref{sec:allreduce}).
 
-\begin{figure}[t]
+\begin{figure*}[t]
 \centering
-\includegraphics[width=\linewidth]{ipcq_alternatives_architecture_stacked.png}
+\includegraphics[width=0.78\linewidth]{ipcq_alternatives_architecture_flow.png}
 \caption{Per-send data and control flow for the four PE-to-PE
 signalling mechanisms (sender\,$\rightarrow$\,NoC\,$\rightarrow$\,receiver).
 Doorbell and RDMA-CQ each issue two fabric transactions (payload then
@@ -158,7 +158,7 @@ the payload flit train and returns the tail credit on a side channel,
 so a send is one MMIO write and a receive is a flip-flop read. This is
 a \emph{design schematic}, not a measured comparison.}
 \label{fig:ipcq-arch}
-\end{figure}
+\end{figure*}
 
 \begin{figure}[t]
 \centering

scripts/paper/paper_plot_ipcq_alternatives_comparison.py

@@ -243,6 +243,12 @@ _FLOW_DATA = "#6699CC"   # blue flit (data)
 _FLOW_CTRL = "#ED7D65"   # orange flit (control)
 _FLOW_CRED = "#7BB661"   # green (credit / ack)
 
+# Font-size multiplier for the flow helpers. The stacked figure renders at
+# full text width (a two-column figure*), so its fonts are scaled up here so
+# they stay legible after the figure is fit to the page. Default 1.0 leaves
+# the 2×2 flow figure unchanged.
+_FS = 1.0
+
 
 def _flow_swim(ax, x, y, w, h, label, sub=None):
     ax.add_patch(mpatches.FancyBboxPatch(
@@ -251,11 +257,11 @@ def _flow_swim(ax, x, y, w, h, label, sub=None):
         facecolor="white", edgecolor="#3a3a3a", linewidth=1.6))
     ax.text(x + w / 2, y + h / 2 + (0.20 if sub else 0),
             label, ha="center", va="center",
-            fontsize=10.5, fontweight="bold", color="#111")
+            fontsize=10.5 * _FS, fontweight="bold", color="#111")
     if sub:
         ax.text(x + w / 2, y + h / 2 - 0.35, sub,
                 ha="center", va="center",
-                fontsize=8, color="#555", fontstyle="italic")
+                fontsize=8 * _FS, color="#555", fontstyle="italic")
 
 
 def _flow_flit(ax, x, y, color, letter="", size=0.32):
@@ -265,7 +271,7 @@ def _flow_flit(ax, x, y, color, letter="", size=0.32):
         facecolor=color, edgecolor="#222", linewidth=0.8))
     if letter:
         ax.text(x, y, letter, ha="center", va="center",
-                fontsize=8.5, fontweight="bold", color="white")
+                fontsize=8.5 * _FS, fontweight="bold", color="white")
 
 
 def _flow_wire(ax, x1, x2, y, color="#888"):
@@ -280,7 +286,7 @@ def _flow_dot(ax, x, y, color):
 
 def _flow_label(ax, x, y, text, color="#222", fontsize=9):
     ax.text(x, y, text, ha="center", va="center",
-            fontsize=fontsize, color=color, fontweight="bold")
+            fontsize=fontsize * _FS, color=color, fontweight="bold")
 
 
 def _flow_lead(ax, x_tail, y_tail, x_head, y_head, color="#777"):
@@ -297,7 +303,7 @@ def _flow_setup(ax, kind):
         facecolor="white", edgecolor=_COLOR[kind],
         linewidth=0.9, alpha=0.85, zorder=0))
     ax.text(10, 0.65, _TITLE[kind],
-            ha="center", va="center", fontsize=11.5,
+            ha="center", va="center", fontsize=11.5 * _FS,
             fontweight="bold",
             color=("#1B5E20" if kind == "ipcq" else "white"),
             bbox=dict(
@@ -449,7 +455,7 @@ def _flow_legend(fig, leg_y=0.02):
                 facecolor=color, edgecolor="#222", linewidth=0.6,
                 transform=fig.transFigure))
             fig.text(lx + 0.025, y + 0.011, text,
-                     ha="left", va="center", fontsize=10,
+                     ha="left", va="center", fontsize=10 * _FS,
                      fontweight="bold", color="#222")
             lx += 0.32
 
@@ -461,21 +467,27 @@ def _flow_legend(fig, leg_y=0.02):
 def _plot_architecture_flow() -> Path:
     """4 panels arranged 2×2 — each a horizontal Sender → NoC → Receiver
     flow with small flit-style packets, dot-marker annotations and a
-    bottom name plate. Aesthetic mirrors latency_model.png."""
-    fig, axes = plt.subplots(2, 2, figsize=(18.0, 11.5))
-    _draw_flow_case(axes[0, 0], "doorbell")
-    _draw_flow_case(axes[0, 1], "hmq")
-    _draw_flow_case(axes[1, 0], "rdma")
-    _draw_flow_case(axes[1, 1], "ipcq")
-    fig.suptitle(
-        "Per-send architecture  =  $\\Sigma$ control overhead  +  "
-        "data-path DMA  +  receiver wake",
-        fontsize=14.5, fontweight="bold", y=0.995)
-    _flow_legend(fig, leg_y=0.015)
-    fig.tight_layout(rect=(0, 0.07, 1, 0.96))
-    out = _OUT_DIR / "ipcq_alternatives_architecture_flow.png"
-    fig.savefig(out, dpi=150, bbox_inches="tight")
-    plt.close(fig)
+    bottom name plate. Aesthetic mirrors latency_model.png. Fonts scaled
+    up via _FS so the figure stays legible when fit to the page."""
+    global _FS
+    _FS = 1.5
+    try:
+        fig, axes = plt.subplots(2, 2, figsize=(18.0, 11.5))
+        _draw_flow_case(axes[0, 0], "doorbell")
+        _draw_flow_case(axes[0, 1], "hmq")
+        _draw_flow_case(axes[1, 0], "rdma")
+        _draw_flow_case(axes[1, 1], "ipcq")
+        fig.suptitle(
+            "Per-send architecture  =  $\\Sigma$ control overhead  +  "
+            "data-path DMA  +  receiver wake",
+            fontsize=14.5 * _FS, fontweight="bold", y=0.995)
+        _flow_legend(fig, leg_y=0.015)
+        fig.tight_layout(rect=(0, 0.07, 1, 0.96))
+        out = _OUT_DIR / "ipcq_alternatives_architecture_flow.png"
+        fig.savefig(out, dpi=150, bbox_inches="tight")
+        plt.close(fig)
+    finally:
+        _FS = 1.0
     return out
 
 
@@ -483,19 +495,25 @@ def _plot_architecture_flow() -> Path:
 def _plot_architecture_stacked() -> Path:
     """Same per-case flow content as the 2×2 figure, but stacked one
     case per row (4 rows × 1 column). Wider panels give each case more
-    horizontal room."""
-    fig, axes = plt.subplots(4, 1, figsize=(16.0, 19.0))
-    for ax, kind in zip(axes, ["doorbell", "hmq", "rdma", "ipcq"]):
-        _draw_flow_case(ax, kind)
-    fig.suptitle(
-        "Per-send architecture  =  $\\Sigma$ control overhead  +  "
-        "data-path DMA  +  receiver wake",
-        fontsize=14.5, fontweight="bold", y=0.997)
-    _flow_legend(fig, leg_y=0.010)
-    fig.tight_layout(rect=(0, 0.05, 1, 0.97))
-    out = _OUT_DIR / "ipcq_alternatives_architecture_stacked.png"
-    fig.savefig(out, dpi=150, bbox_inches="tight")
-    plt.close(fig)
+    horizontal room. Rendered at full text width (two-column figure*), so
+    fonts are scaled up via _FS to stay legible after page fitting."""
+    global _FS
+    _FS = 1.9
+    try:
+        fig, axes = plt.subplots(4, 1, figsize=(13.0, 15.0))
+        for ax, kind in zip(axes, ["doorbell", "hmq", "rdma", "ipcq"]):
+            _draw_flow_case(ax, kind)
+        fig.suptitle(
+            "Per-send architecture  =  $\\Sigma$ control overhead  +  "
+            "data-path DMA  +  receiver wake",
+            fontsize=14.5 * _FS, fontweight="bold", y=0.997)
+        _flow_legend(fig, leg_y=0.010)
+        fig.tight_layout(rect=(0, 0.06, 1, 0.97))
+        out = _OUT_DIR / "ipcq_alternatives_architecture_stacked.png"
+        fig.savefig(out, dpi=150, bbox_inches="tight")
+        plt.close(fig)
+    finally:
+        _FS = 1.0
     return out