New sidebar widget in the Workload expander:
Batch B (concurrent requests) — selectbox 1/2/4/…/256, default 1.
Wired end-to-end:
- app.py sidebar → forwards b_batch when constructing the main topo
- auto_suggest(..., b=1) — passes b to _score_candidate, which builds
TopologyConfig with b=b
- run_auto_explore(..., b=1) — sets topo.b = b for every enumerated
candidate before scoring
- joint_explore(..., b=1) — forwards b to _best_parallelism_for_hw
and _best_parallelism_two_stage; both set topo.b = b before scoring
All button handlers (sidebar Apply-scope, Physical Layout scope,
Auto Suggest tab sweep, Auto Hardware tab sweep) now pass b_batch.
Combined with the earlier partial-scaffold commits (memory_layout
scales KV by B; stage_rmsnorm / stage_wq / stage_wkv / stage_kv_append /
_per_hop_qkT_pv scale flops + activation memory by B), changing B in
the sidebar now affects reported latency and per-PE memory footprint
in the visible parts of the pipeline. The remaining FFN + comm-AR
stages still ignore B (they'll be next); their contribution is small
for the memory-bound decode case that matters most, but latency for
FFN-heavy configs at high B will be slightly under-reported until
those are scaled too.
Verified: 24 pytest tests pass at default B=1 (backward compat).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Every place that picks a single "best" config from the Pareto set now
uses a compound sort key: (latency_ns ↑, pes_used ↑, hbm_utilization ↑).
Primary = latency; when configs tie on latency (common — cp_ring
variants, some placement variants often produce identical numbers),
prefer smaller-footprint picks.
Places updated:
- app.py: sidebar Apply Attn/FFN/Attn+FFN button
- app.py: Physical Layout tab Attn/FFN/Attn+FFN button
- app.py: Auto Suggest tab "Best latency" metric
- app.py: Auto Hardware tab "Best latency" metric (uses parallelism.pes_used
+ parallelism.hbm_utilization since JointScore wraps ConfigScore)
- auto_hardware.py: _best_parallelism_for_hw iteration key
No behavior change when there's a strict latency winner. When there are
ties, the picked config uses fewer PEs and lower HBM utilization.
Verified: all 24 pytest tests pass (default include_attention=True and
include_ffn=True paths unchanged).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Was 512 GB/s in the analytical viz MachineParams default. Bringing the
default down to 128 GB/s to match what the modelled physical link now
represents (parity with inter-cube D2D and topology.yaml).
Files touched (all three needed to keep defaults coherent):
- model_config.py: MachineParams.bw_intra_gbs = 128.0 (was 512.0)
- app.py: sidebar selectbox default index = 0 (128 GB/s) instead of 2 (512)
- auto_hardware.py: _HW_KNOB_DEFAULTS + BALANCED + COARSE bw_intra_gbs
baselines shifted so cost_score at defaults remains 6.0 and the
sensitivity sweep starts from the new baseline.
Verified: 24 pytest tests pass.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Both auto tabs now offer three sweep scopes via three buttons instead
of two:
- Run sweep — Attention → include_attention=T, include_ffn=F
- Run sweep — FFN/MoE → include_attention=F, include_ffn=T
- Run sweep — Attn + FFN/MoE → include_attention=T, include_ffn=T
Each button caches its result under its own session_state key; the most
recently clicked button drives the display. All three caches persist so
users can flip between scopes without re-running.
Core changes:
auto_explore.py + auto_hardware.py:
- New include_attention: bool = True param alongside include_ffn
- _sum_visible_latency, _efficiency, score_config, run_auto_explore,
compute_parallelism_sensitivity, joint_explore, compute_sensitivity,
_best_parallelism_for_hw, _best_parallelism_two_stage all wired.
- Attention and FFN are additive with no overlap: measured 7.35 ms
(attn) + 5.50 ms (ffn) = 12.85 ms (full) for Llama 70B decode 128K.
Bug fix (drive-by): the display block in both tab render functions was
incorrectly nested inside the "cached ctx is stale" warning branch, so
metrics/scatter/table/sensitivity/load only rendered when the cache
was stale. Un-indented and removed the dead trailing else-info block.
Verified:
- 24 pytest tests pass (added 1 new for FFN-only scope invariants)
- Smoke: Llama 70B decode 128K all three scopes produce sensible Pareto:
* Attention only: 7.35 ms (14 pareto configs)
* FFN / MoE only: 5.50 ms (34 pareto configs)
* Attn + FFN/MoE: 12.85 ms (6 pareto configs)
Sums add up exactly, confirming no overlap in stage summation.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Both auto tabs now accept a scope choice at run time:
- "Run sweep — Attention" → include_ffn=False
- "Run sweep — Attn + FFN/MoE" → include_ffn=True
Each button runs an independent sweep and caches its result under its
own session_state key. The most recently clicked button determines the
displayed view; both caches persist so users can flip between the two
scopes without re-running.
Tabs:
- Renamed "Auto Explore" → "Auto Suggest Parallelism"
(accurately reflects that it only varies parallelism knobs; HW is
held at the sidebar values).
- "Auto Hardware" tab unchanged.
- Still 6 top-level tabs; no additional tabs added.
Core changes:
auto_explore.py:
- New include_ffn: bool = True parameter on _sum_visible_latency,
_efficiency, score_config, run_auto_explore, compute_parallelism_
sensitivity. False drops all FFN stages from the summed latency.
auto_hardware.py:
- New include_ffn: bool = True parameter on joint_explore,
compute_sensitivity, _best_parallelism_for_hw, _best_parallelism_
two_stage. Forwards to score_config.
Both defaults keep existing tests byte-identical.
Verified:
- 23 pytest tests pass (added 3 new: attn-only latency lower, attn-only
Pareto non-empty, joint HW attn-only faster than full).
- Smoke: Llama 70B decode 128K:
* Attn+FFN best latency: 12.85 ms (unchanged)
* Attention-only best: 7.35 ms (~57% of full)
* Both sensitivities top-rank bw_hbm_gbs (physics preserved).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
New module extends auto_explore into the hardware co-design space. For a
fixed model + workload, sweeps hardware knobs (pe_hbm_gb, bw_hbm_gbs,
peak_tflops_f16, bw_intra_gbs, bw_inter_gbs, bw_intersip_gbs) and, for
each hardware candidate, searches parallelism for the latency-minimum
that fits memory. Returns:
- all_scores: every (hw, parallelism) pair that fits, sorted by latency
- pareto_scores: 2D Pareto frontier on (latency ↓, cost_score ↓)
- sensitivity: per-knob rel_speedup when doubled from the best-fast HW
baseline. Ranks which HW knob gives the biggest speedup — a co-design
signal.
Three sweep depths trade coverage for time:
- two_stage: 1 HW candidate (defaults) × autosuggest's memory-min
parallelism. Fast (~1s), useful for the sensitivity ranking alone.
- balanced: 64 HW × ~2k reduced-parallelism configs = ~130k joint evals,
~10-20s. Default UI setting.
- coarse: 729 HW × ~2k configs = ~1.4M joint evals, ~2-5 min.
Reduced parallelism sweep for the inner loop: CP × TP × PP × DP ×
kv_shard_mode (1,920 configs), other 4 knobs held at latency-friendly
defaults (ffn_shard_scope='TP+CP', tp_placement='cube', cp_placement='pe',
cp_ring_variant='qoml' for decode, 'kv' for prefill). Full 28,800-config
auto_explore per HW would take 6+ minutes — too slow.
Cost proxy: sum of (knob / knob_default). 6.0 at defaults. Not dollars —
a rough capability score where higher = "more spec'd hardware".
Verified:
- 9 pytest tests pass:
* enumeration counts match expected (1, 64, 729)
* default cost_score = 6.0
* Pareto non-dominated + subset of all_scores
* every knob is monotone-non-worsening when doubled
* for Llama 70B decode, bw_hbm_gbs tops the sensitivity ranking
(physically correct: memory-bound workload)
- Smoke: Llama 70B decode 128K balanced sweep in ~20s produces
5 Pareto configs; best 7.57 ms with 1024 GB/s HBM BW. Doubling
HBM BW gives 33% additional speedup; every other knob < 1.5%.
Next: Streamlit UI tab consuming this in Commit 5.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
mukesh