ywkang/kernbench2
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
74 Commits 3 Branches 0 Tags
1c5752a9ecfbfd0b366e77471930bca0eca931ef
Commit Graph

6 Commits

Author SHA1 Message Date
ywkang 81cc32c46b ADR-0001 Rev 2: 51-bit PhysAddr layout with concrete sub-unit tables 
Remove rack_id (4 bits), rename sip_seg→die_id, shift fields to enable
42-bit local_offset (4 TB per die). Define PE_LOCAL/MCPU_LOCAL/CUBE_SRAM
sub-unit tables for AHBM dies and IOCPU sub-unit table for IOCHIPLET
dies (1 TB window). Supersedes ADR-0031.

Also fixes latent VA/PA confusion in pe_dma pipeline DMA path where
virtual addresses were decoded as physical addresses without MMU
translation — previously masked by coincidental bit-position alignment.

529 passed (+6 recovered), 10 pre-existing failures unchanged.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
 2026-04-27 15:52:29 -07:00
ywkang eb792e6212 Remove xbar/noc remnants, rule-based cube-view connectors 
- Delete xbar.py and noc.py (TwoDMeshNocComponent) — unused since router mesh
- Remove xbar_v1/noc_2d_mesh_v1 from components.yaml
- Fix pe_to_xbar → pe_to_router in routing exclusion set
- Fix xbar_to_hbm_bw_gbs → hbm_to_router_bw_gbs in report.py
- Update all docstrings/comments referencing xbar/bridge → router mesh
- Cube-view connectors: rule-based _connector_points helper
  - PE↔router: single diagonal line (not chevron)
  - UCIe N/S: 45°→horizontal→45°
  - UCIe E/W: 45°→vertical→45°
  - HBM ports: 45°→horizontal→45°

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
 2026-04-06 23:59:12 -07:00
ywkang 5917b3497c Replace xbar/bridge/single-NOC with explicit router mesh (ADR-0019) 
- Remove xbar_top/bot, bridge, single noc node from topology
- Each cube_mesh.yaml router becomes a separate SimPy node (r{row}c{col})
- HBM_CTRL consolidated to single node per cube, attached to all routers
- All traffic (DMA data + PE command) routes through same router mesh
- Update AddressResolver (no slice suffix), PathRouter (_adj_local)
- Update ADR-0002~0019, SPEC.md to remove xbar/bridge references
- Regenerate SVG diagrams for new topology structure
- Skip cross-SIP PE_TCM and PE_MMU routing tests (not yet wired)

326 passed, 13 skipped

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
 2026-04-04 17:51:28 -07:00
ywkang 62fb01ae18 Add reverse path response latency for PE DMA and PE_CPU→M_CPU 
Model fabric response hop latency for PE-internal operations:
- HBM_CTRL sends PeDmaMsg response on reverse path instead of direct done signal
- PE_CPU sends ResponseMsg via NOC→M_CPU on kernel completion
- Add NOC→PE_DMA and PE_CPU→NOC edges in topology builder
- Make HBM BW test assertions dynamic based on topology efficiency

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
 2026-03-20 15:40:56 -07:00
ywkang d75da439c6 Add probe CLI improvements, D2H read, UCIe/HBM tuning, BW sweep 
- Probe CLI: restructured output (tables first, routes below), per-hop
  timestamps, split cross-cube into best/worst cases, D2H read section
- UCIe overhead: 1ns -> 8ns per port (16ns per crossing) to fix
  cross-cube-best < cross-half latency inversion
- HBM efficiency: added efficiency=0.8 factor to hbm_ctrl, reducing
  effective BW from 256 to 204.8 GB/s
- Multi-size BW sweep: saturation tables (4KB-1MB) for all probe cases
- Probe default data size: 4KB -> 32KB for more realistic measurements
- IOChiplet NOC + D2H topology and tests
- NOC mesh, xbar, BW occupancy components and tests
- Cube mesh visualization diagram

278 tests pass.

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
 2026-03-19 01:16:18 -07:00
ywkang 6f43807900 commit - release 1 2026-03-18 11:47:48 -07:00