# ADR-0037: Forwarding Component (forwarding_v1)

## Status

Accepted

## Context

The simulation graph has many node positions that exist purely to model
fabric traversal — NOC mesh routers, switches, UCIe protocol endpoints,
IO chiplet io_noc, transit cubes. These share a common pattern: receive
a message, apply per-component overhead (modeling header decode +
routing decision time), forward to the next hop along the pre-computed
path.

This ADR defines the contract for these transit nodes: a single
component type (`TransitComponent`) that handles flit-aware forwarding
with wormhole cut-through semantics, used under multiple impl names
according to the conceptual role each instance plays.

## Decision

### D1. Role

The Forwarding component (`TransitComponent` class) is a **stateless
transit node** in the simulation graph. It models any fabric position
where a message physically traverses but no semantic processing
happens.

Per traversal, the component:

1. Reads an incoming Transaction or Flit from an `in_port`.
2. Applies the configured per-component overhead (`overhead_ns`),
   applied **once per Transaction** even across multi-flit payloads
   (see D2).
3. Looks up the next hop along the Transaction's pre-computed `path`.
4. Forwards to the corresponding `out_port`; at the terminal node
   (no next hop), signals `txn.done` once the `is_last` flit arrives.

The component **does NOT**:

- Decide routing — paths are pre-computed by the router (ADR-0002 /
  ADR-0017 D2). Forwarding only executes the per-hop step.
- Model wire propagation or bandwidth occupancy — separate wire
  processes between components handle that (ADR-0015 D2).
- Resolve addresses — the AddressResolver does that (ADR-0017 D9).
- Aggregate completion — terminal endpoints (IO_CPU, M_CPU, HBM_CTRL)
  handle that.

### D2. First-flit overhead model (header decode)

Per-Transaction `overhead_ns` is applied **exactly once**, at first
flit arrival:

- `_txn_decoded: set[int]` tracks which Transactions have already
  paid the overhead at this node.
- On first-flit arrival for a Transaction: `yield self.run(env,
  msg.txn.nbytes)` — pays the overhead.
- Subsequent flits of the same Transaction skip the overhead — they
  pipeline through with no extra delay.
- On `is_last` flit: remove the Transaction from `_txn_decoded`.

This models the real-HW behavior where header decode and routing
decision happen once on first flit; payload flits then stream through
the same path (wormhole cut-through). Multi-hop pipelining emerges
naturally — each hop adds its own first-flit overhead, but flits
after the first do not re-pay overhead at any hop they have already
passed first.

### D3. Serial worker forwarding (preserves order)

The component's worker is a single SimPy process that consumes flits
from `_inbox` and forwards them serially in arrival order. The
component does NOT spawn `env.process(...)` per flit.

Rationale: if the first flit yields on `overhead_ns` while subsequent
flits run in parallel processes, the later flits can overtake the
first. This produces out-of-order delivery and lets the `is_last`
flit arrive at the destination before the first flit — corrupting
both the transaction's completion semantics and any flit-index-based
processing downstream.

### D4. Path-based next-hop routing

Routing is **not** a Forwarding-component concern. The Transaction
arrives with a pre-computed `path` (built by the router; ADR-0002 /
ADR-0017 D2). The component just looks up its own position in the
path and forwards to `path[index + 1]`:

```python
def _next_hop_in_path(self, txn):
    my_id = self.node.id
    path = txn.path
    for i, n in enumerate(path):
        if n == my_id and i + 1 < len(path):
            return path[i + 1]
    return None
```

If `next_hop` is found and present in `out_ports`, the flit is
forwarded. Otherwise (terminal node), `txn.done.succeed()` is
invoked when the `is_last` flit arrives.

### D5. Flit-aware mode with Non-Flit fallback

`_FLIT_AWARE = True` opts this component out of the base class's
flit-reassembly logic in `_fan_in`. Flits are placed directly on
`_inbox` (no reassembly), enabling per-flit handling in the worker
loop (D2, D3).

Non-Flit messages — zero-byte control Transactions and other
non-chunkified payloads — fall through to the base class's legacy
`_forward_txn` path via `env.process`. This preserves backward
compatibility for control-plane traffic that does not benefit from
flit-level processing.

### D6. Multi-stream merging at the base class

Multi-stream FIFO merging at routers is the base class's
responsibility, not Forwarding's. The base class's `_fan_in` spawns
one process per `in_port`; all push to a single shared `_inbox`.
Flits from different upstream streams therefore interleave at
flit granularity in `_inbox`'s FIFO order.

The Forwarding worker simply consumes `_inbox` in arrival order —
correctly modeling per-router multi-flow arbitration as
fair-FIFO over the shared inbox.

### D7. Single implementation under multiple impl names

A single `TransitComponent` class is registered under four impl names
in `components.yaml`:

- `builtin.forwarding` — generic forwarding (e.g., `io_noc`,
  `noc_router`, UCIe conn bridges)
- `builtin.switch` — tray-level switch
- `builtin.noc` — cube-level NOC fabric (legacy singleton; current
  NOC routers use `builtin.forwarding`)
- `builtin.ucie` — UCIe protocol endpoint

All four aliases instantiate the same class with the same behavior.
Per-instance differentiation lives only in `attrs.overhead_ns`.
Separate impl names exist as intent tags for readability and to
allow future divergence without backward-incompatible config
changes.

### D8. Configurable `overhead_ns`

A single attribute drives per-instance latency:

| Usage site | impl name | overhead_ns |
| --- | --- | --- |
| Tray-level switch | `builtin.switch` | 5.0 |
| Cube NOC router | `builtin.forwarding` | 2.0 |
| IO chiplet io_noc | `builtin.forwarding` | 0.0 |
| UCIe protocol endpoint (`ucie-{N,S,E,W}`) | `builtin.ucie` | 8.0 |
| UCIe conn bridge (`ucie-{PORT}.conn{N}`) | `builtin.forwarding` | 0.0 |

Default is 0.0. The attribute is read at each `run()` invocation, so
dynamic reconfiguration is possible but not currently used.

## Consequences

### Positive

- A single class handles all transit-node roles in the simulation
  graph — minimal code surface for a high-population component type.
- Flit-aware processing + serial worker preserves wormhole semantics
  across multi-hop paths without per-flit process overhead.
- `overhead_ns` is the only per-instance tunable; routing, BW, and
  address resolution stay cleanly separated in their own components /
  modules.
- Multi-stream merging emerges from the base-class structure; no
  router-specific logic duplicates fair-FIFO arbitration.
- Non-Flit fallback path keeps control-plane traffic working without
  forcing every message into the flit framework.

### Negative

- The single class hides usage-site intent inside `attrs.overhead_ns`
  configuration; readers must consult `topology.yaml` +
  `components.yaml` to see which impl name maps to which behavior
  class.
- Per-flit serial worker is a bottleneck if `overhead_ns` is large
  and many concurrent transactions arrive at the same router; current
  values (0–8 ns) make this negligible.

## Links

- ADR-0002 (Routing distance — path computation)
- ADR-0015 D1 (Component port model)
- ADR-0015 D2 (Wire process — BW + propagation, separate from this
  component)
- ADR-0015 D6 (Transit cube forwarding pattern)
- ADR-0016 D1 (IO chiplet io_noc — uses this component)
- ADR-0017 D1 (Cube NOC routers — use this component)
- ADR-0017 D6 (UCIe decomposition — `ucie-{PORT}` instances use this
  component)
- ADR-0033 D1 (Flit-aware pass-through, first-flit overhead,
  multi-stream merge semantics)