# ADR-0017: Cube NOC 2D Mesh Architecture

## Status

Accepted

## Context

ADR-0003 D3 defines the cube-level NOC as a "distributed on-die fabric" but
does not specify the internal routing model, contention semantics, or
attachment topology. The implementation uses a 2D mesh router grid with
XY routing and per-segment contention modeling. This ADR formalizes that
architecture.

## Decision

### D1. NOC node and router grid

Each cube contains a 2D router mesh generated by `mesh_gen.py`.
Each router is a separate topology node (`sip{S}.cube{C}.r{row}c{col}`)
implemented as `forwarding_v1`. (Supersedes the original single-node
`noc_2d_mesh_v1` design — see ADR-0019.)

Grid properties:

- Default dimensions: 6x6 routers (derived from PE layout + UCIe connections)
- Router naming: `r{row}c{col}` (e.g., `r0c0`, `r5c5`)
- HBM exclusion zone: center rows/columns are excluded where HBM physically
  occupies space (e.g., r2c2, r2c3, r3c2, r3c3)
- Router positions are derived from physical PE corner placement and cube
  geometry

The NOC overhead_ns is 0.0. Latency is modeled by Manhattan distance
traversal within the mesh (distance_mm x ns_per_mm).

### D2. XY routing algorithm

The NOC uses deterministic XY routing:

1. Horizontal segment: route from source X to destination X at source Y
2. Vertical segment: route from destination X at source Y to destination Y

Each directed segment is identified by a unique link key:

- Horizontal: `("H", y_band, x_min, x_max, direction)`
- Vertical: `("V", x_band, y_min, y_max, direction)`

Grid positions are snapped to the router grid, excluding the HBM zone.

### D3. Contention model

Each directed XY segment is a `simpy.Resource(capacity=1)`. Transactions
sharing a segment (same row or column band, same direction) contend for the
resource. This models link-level serialization in a wormhole-routed mesh.

With no contention, NOC traversal latency equals the Manhattan distance
multiplied by `ns_per_mm`. Under contention, additional queueing delay
is added by SimPy's resource scheduling.

### D4. NOC attachment points

The NOC connects to all major cube-level components:

```text
                    UCIe-N (conn x4)
                         |
           +---------+---+---+---------+
           |         |       |         |
PE0.dma ---+  r0c0   |  ...  |  r0c5  +--- PE2.dma
PE0.cpu <--+         |       |         +--< PE2.cpu
           |         |       |         |
UCIe-W ----+  ...    | [HBM] |  ...   +---- UCIe-E
(conn x4)  |         | zone  |         |  (conn x4)
           |  r2c0   |       |         |
M_CPU <--->+         |       |         |
           |  r3c0   |       |         |
SRAM <---->+         |       |         |
           |         |       |         |
PE4.dma ---+  r4c0   |  ...  |  r4c5  +--- PE6.dma
PE4.cpu <--+         |       |         +--< PE6.cpu
           |         |       |         |
           +---------+---+---+---------+
                         |
                    UCIe-S (conn x4)

HBM attach: PE가 있는 라우터에 hbm_ctrl도 연결 (ADR-0019 D1)
(xbar_top/xbar_bot은 ADR-0019에 의해 제거됨)
```

### D5. NOC edge bandwidths and distances

| Connection | BW (GB/s) | Distance | Notes |
| --- | --- | --- | --- |
| PE_DMA -> NOC | 256.0 | Physical (PE pos) | Matches HBM slice BW |
| NOC -> PE_CPU | - | 0.0 mm | Command path only |
| Router <-> HBM_CTRL | 256.0 | 0.0 mm | Per PE router (ADR-0019) |
| NOC <-> M_CPU | - | 0.0 mm | Command path |
| NOC <-> SRAM | 128.0 x4 | 0.0 mm | 512 GB/s aggregate |
| NOC <-> UCIe conn | 128.0 | 0.0 mm | Per connection, 4 per port |

Distance 0.0 mm for most connections reflects the distributed nature of
the NOC; the actual traversal distance is computed internally via Manhattan
distance within the router grid.

### D6. UCIe decomposition and inter-cube traffic

Each cube has 4 UCIe ports (N, S, E, W). Each port is decomposed into:

- 1 `ucie-{PORT}` node: UCIe protocol endpoint (overhead = 8.0 ns)
- 4 `ucie-{PORT}.conn{0-3}` nodes: connection bridges between NOC and UCIe

This decomposition enables N=4 independent NOC-to-UCIe connections per port,
each with 128 GB/s bandwidth. Total aggregate per port: 512 GB/s.

Inter-cube traffic path:

```text
Source: PE_DMA -> NOC -> conn{i} -> ucie-{PORT}
                    [UCIe link: 512 GB/s, 1.0mm seam distance]
Target: ucie-{PORT} -> conn{i} -> r{x}c{y} -> (mesh hops) -> hbm_ctrl
```

UCIe overhead (8.0 ns) is applied at each ucie-{PORT} node, so a
full crossing incurs 16 ns (TX port + RX port).

### D7. Data paths through the NOC

**PE DMA to local HBM (same half):**

```text
PE_DMA -> r{x}c{y} -> hbm_ctrl  (local: 0 mesh hops, switching overhead only)
```

**PE DMA to remote PE's HBM:**

```text
PE_DMA -> r{x}c{y} -> (mesh hops) -> r{x'}c{y'} -> hbm_ctrl
```

**PE DMA to remote cube HBM:**

```text
PE_DMA -> r{x}c{y} -> conn -> ucie-E -> [seam] -> ucie-W -> conn -> r{x'}c{y'} -> hbm_ctrl
```

**Kernel Launch command to PE:**

```text
[from io_noc] -> ucie -> conn -> r{x}c{y} -> (mesh hops) -> M_CPU -> (mesh hops) -> PE_CPU
```

**Shared SRAM access:**

```text
PE_DMA -> r{x}c{y} -> (mesh hops) -> SRAM
```

### D8. Mesh generation

The router grid is generated by `mesh_gen.py` based on:

- `cube.pe_layout`: corner placement (NW, NE, SW, SE) and PEs per corner
- `cube.geometry`: cube physical dimensions and HBM zone
- `cube.ucie.n_connections`: determines router count for UCIe attachment

The generator produces a `mesh_data` dictionary containing:

- Router grid with positions and HBM exclusion zones
- PE-to-router attachments (pe_dma, pe_cpu per PE)
- UCIe-to-router attachments (N/S/E/W, distributed across edge routers)
- M_CPU and SRAM router attachments
- HBM attachment per PE router (ADR-0019)

## Consequences

- NOC provides position-aware routing with deterministic latency
- Contention is captured per directed segment (not per-node)
- All cube-internal traffic is explicitly routed through the NOC
- HBM exclusion zone reflects physical die layout constraints
- The mesh generation is fully parameterized by `topology.yaml`

## Links

- ADR-0003 D3 (cube-level NOC definition — extended by this ADR)
- ADR-0004 D1 (PE DMA to local HBM path via router mesh)
- ADR-0014 D1 (PE_DMA egress via router mesh)
- ADR-0019 (NOC-Local HBM — xbar/bridge 제거, 명시적 라우터 mesh)
- ADR-0015 D4 (fabric paths for Memory R/W and Kernel Launch)
- ADR-0016 D1 (IOChiplet io_noc — analogous pattern at IO chiplet level)