Restores per-PE HBM controller partitioning that was lost in
commit 5917b34 ("Replace xbar/bridge/single-NOC with explicit
router mesh"), which had over-consolidated the per-slice HBM CTRL
into a single cube-wide ``hbm_ctrl`` connected to every router —
the opposite of what ADR-0019 D1/D4 specifies.
Builder splits ``hbm_ctrl`` into 8 ``hbm_ctrl.pe{X}`` instances per
cube, each reachable ONLY through PE_X's attaching router via the
existing ``peX.hbm`` attach metadata from cube_mesh.yaml. Cube
aggregate BW now matches the spec (8 PEs × 8 PCs × 32 GB/s =
2048 GB/s) instead of collapsing to 256 GB/s.
AddressResolver decodes the target PE from the HBM PA's hbm_offset
(``offset // slice_size``) and returns ``hbm_ctrl.pe{X}``. PathRouter
uses the existing ``_adj_local`` adjacency for same-cube PE_DMA so
the cube's own UCIe port can no longer appear as a zero-distance
shortcut between routers — local PE_DMA now traverses the mesh,
restoring the ADR-0019 D4 worked example
``PE0.pe_dma → r0c0 → … → r1c4 → hbm_ctrl``.
Tests:
- New tests/test_per_pe_hbm_partition.py: 14 tests covering
topology shape, per-PE router exclusivity, PA resolution,
single-hop local path, cross-PE mesh traversal, and end-to-end
latency monotonicity. Probe CLI now reports
pe-local < pe-same-half < pe-cross-half (was uniform 141ns).
- Existing tests updated for new node ids and replaced two
assertions that locked in the wrong consolidation:
test_noc_mesh.test_hbm_connects_to_all_routers and
test_topology_compile.test_hbm_ctrl_connects_all_routers are
now per-PE exclusivity assertions; test_routing
.test_all_pe_hbm_equidistant becomes
test_cross_pe_hbm_distance_increases_with_mesh_hops.
- test_ipcq_buffer_kind_locations.test_hbm_pe_hop_charged_at_large_payload
threshold recalibrated 4000→1500 ns: the prior figure reflected
serialization on the over-consolidated single hbm_ctrl; per-PE
partitioning removes that artificial contention so the gap
shrinks to the genuine PE↔HBM-hop cost.
Full suite: 645 passed, 1 skipped.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Allreduce + pe2pe + ipcq + pe_view auto-regenerated by test sweeps
running against the new chunk-streaming wire timing (per-flit
wormhole) — absolute numbers shift upward to reflect bottleneck-link
transit charged once per flit (instead of the previous cut-through
subtraction at HBM CTRL).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Cube SRAM and HBM live on the cube NoC behind router-attached links
(sram_to_router_bw_gbs=128, hbm_to_router_bw_gbs=256). Previously the
slot-IO model treated them as if they were per-PE local, so the
buffer_kind sweep showed TCM ≈ SRAM at 64 KB / PE.
pe_ipcq._handle_recv and pe_dma._handle_ipcq_inbound now charge a
PE→bank compute_drain_ns on top of the intrinsic slot-IO for SRAM/HBM.
TCM stays free of this hop. Adds an internal IpcqRecvCmd.consume field
that gates the recv-side hop+slot-IO charges (used by a follow-up
diagnostic API; default True keeps current behavior).
Post-fix at 64 KB / PE: TCM 12.0 µs < HBM 21.4 µs < SRAM 24.3 µs.
SRAM is slowest because its 128 GB/s bank link is the narrowest in
the system — narrower than HBM's 256 GB/s. The existing ordering test
is rewritten from tcm<sram<hbm to tcm<hbm<sram and a new
test_ipcq_buffer_kind_locations adds 3 invariants on the gap.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
ywkang
mukesh