kernbench2/docs/adr-ko/ADR-0016-dev-iochiplet-noc-and-memory-path.md

# ADR-0016: IOChiplet NOC and Memory Data Path

## Status

Accepted

## Context

ADR-0003 D2 defines IO chiplets as SIP-level components providing PCIe-EP and
IO_CPU interfaces, but does not specify internal routing within the IO chiplet.
ADR-0015 D4 was updated to document the M_CPU bypass for Memory R/W, but the
IO chiplet's internal NOC architecture that enables this routing was not
formally documented.

The IO chiplet needs an internal routing fabric (io_noc) to:

- connect pcie_ep, io_cpu, and per-cube UCIe PHY ports
- route memory operations (MemoryWrite/Read) directly to cube fabric without
  passing through io_cpu
- route kernel launch commands through io_cpu for command interpretation

## Decision

### D1. IOChiplet internal NOC (io_noc)

Each IO chiplet instance contains an internal NOC node (`io_noc`) that connects:

- `pcie_ep` — host-facing PCIe endpoint
- `io_cpu` — command processor for kernel launch interpretation
- `io_ucie-{PHY}.conn{N}` — per-PHY connection nodes to cube UCIe ports

The io_noc is a forwarding-only fabric (`forwarding_v1` implementation) with
zero overhead. All routing decisions are made by the simulation engine based
on message type, not by io_noc itself.

### D2. IOChiplet UCIe decomposition

Each IO chiplet PHY port is decomposed into:

- `io_ucie-{PHY}` — the UCIe protocol endpoint (overhead = 8ns)
- `io_ucie-{PHY}.conn{N}` — N connection nodes between io_noc and io_ucie

This mirrors the cube-side UCIe decomposition (ADR-0015 D1) and allows
multiple independent NOC-to-UCIe connections per PHY.

### D3. Memory R/W path (M_CPU bypass)

Memory operations (MemoryWrite, MemoryRead) are routed directly from pcie_ep
through io_noc to the target cube, bypassing io_cpu entirely:

```text
pcie_ep → io_noc → conn → io_ucie → [cube UCIe] → router mesh → hbm_ctrl
```

This avoids the 10ns io_cpu overhead for pure data transfers. The simulation
engine's `_process_memory_direct()` method uses `find_memory_path()` which
resolves the shortest path from pcie_ep to the target HBM node.

### D4. Kernel Launch path (via io_cpu)

Kernel launch commands require io_cpu for command interpretation and PE
fan-out setup:

```text
pcie_ep → io_noc → io_cpu → io_noc → conn → io_ucie → [cube UCIe]
  → noc → m_cpu → PE
```

The engine's `_entry_points()` method routes KernelLaunchMsg through both
pcie_ep (entry) and io_cpu (command processing).

### D5. IOChiplet-to-cube port mapping

Each IO chiplet instance declares which cube ports it connects to:

```yaml
cube_ports:
  - { cube: {xy: [0,0]}, cube_side: N, phy: P0, distance_mm: 2.0 }
  - { cube: {xy: [1,0]}, cube_side: N, phy: P1, distance_mm: 2.0 }
```

The topology builder creates edges from io_ucie PHY nodes to the
corresponding cube UCIe port nodes, with the specified distance and
the IO chiplet's `per_connection_bw_gbs` as link bandwidth.

## Consequences

- IO chiplet has a well-defined internal routing fabric
- Memory operations avoid unnecessary io_cpu overhead
- Kernel launch commands still get proper command interpretation
- The io_noc pattern is consistent with cube-level NOC design
- ADR-0003 D2 is extended (not contradicted) by this ADR

## Links

- ADR-0003 D2 (IO chiplet definition)
- ADR-0015 D4 (fabric paths for Memory R/W and Kernel Launch)
- ADR-0012 D1 (host-to-IO_CPU message schema)